Tire Pressure Monitor Sensor TPMS Tool O695

Features

• EL-50448 tpms reset tool can help you reprogram all tires much easier just with 3 steps.Tire pressure monitor sensor activation tool is simple . fast and easy to use . activates the individual TPM sensor with the press of one button
• An essential tool of replacement tire pressure sensor . tire pressure alarm remove or exchange tires.Works on most General Motors (Chevy/Buick/GMC/Opel) equipped with 315 or 433 MHz Tire Pressure Monitor system (TPMS) sensor.
• How to Use: Ensure that the vehicle is in the TPMS Learn Mode . and follow the service procedure. Hold tool against the sidewall of the tire . near the valve stem. Depress Learn button while holding the tool against the tire sidewall.
• For Different vehicle EL50448 may need different times to reset all of your tire sensors after rotation
• Notice: 1. When using EL50448 . please make sure antenna in correct position. 2. Please make sure the 9v battery in good condition

How to use

• Step 1 - Enter leaning mode
• Set the gearshift lever to 'P'
• Put the ignition switch to 'ON'
• Enter the interface of tire pressure display by DIC
• DIC shows 'Press Set / Ctrl to re-learn'
• Press 'Set / Ctrl'
• The turn signal is lighted for 3 seconds and the horn beep sound twice to enter the learning mode
• Step 2 - Read tire pressure sensor information
• Start from the front-left wheel
• Make the J-46079 or Diagnostic Tool EL-50448 antenna up against the valve core position & close to the rim of the tire sidewall
• El-50448 tire pressure tool starts by the start switch
• Successful to read the tire pressure sensor information when the horn bleeps once
• Step 3 - Same method to read other tire pressure information
• Follow the instruction above to read tire pussure of the front-right . rear-right . rear-left wheels
• Turn signals is lighted for 3 seconds and the horn bleeps twice when the learning is complete

What's in the package

• 1 x EL-50448 tool